Automotive Koncepts & Designs AWD Trailing Arms

1,250.00$1,360.00$

*Trailing Arms

These new V1.5 Trailing Arms will allow for the installation of rear axles and many wheel hub and CV Axle combinations. They promote better suspension geometry while allowing the use of OEM or aftermarket Sway Bars and OEM or aftermarket camber kits. They are tubular in design and will allow power transfer from the rear differential to drive the rear wheels with gear “0” axle angle. They are made out of Chromoly, like the sub-frame and can be further customized by selecting options for powder coating color, chassis style and lug pattern.” Our V1.5 Trailing Arms come with all necessary hardware for installation. Trailing arms are provided with “Karcepts” spherical top hats, 4340 Chromoly hubs available in 4×100, 4×114.3 or 5×114.3, “Timken” wheel bearings with retainers, “ESM Race” Spherical Lower Control Arms and “StopTech” Steel Braided lines.

Clear
SKU: TA-AWDCO-AWD Category:

Description

These new V1.5 Trailing Arms will allow for the installation of rear axles and any of 3 differentials while retaining the use of the factory rear struts, LCA’s, Sway Bar and camber kits. They are tubular in design and will allow power transfer from the transfer case to drive the rear wheels. They’re chromoly with options for finishing powder coat color, chassis style and lug pattern. They come with all necessary hardware and instructions for installation. These tubular trailing arms are equipped with adjustable spherical bearings to allow for easy toe adjustments and allow a significant weight savings over the factory rear trailing arms. The new V1.5 trailing arm removes the factory Honda CR-V Rear wheel bearing in favor of our new Bearing Hub retainer and retainer flange allowing the use of a 2002 Civic SI front wheel bearing to be used in the rear allowing better CV axle diameter clearances for the outer joints and better compatibility to existing CV Axles on the market. Can be ordered with 4 x 100, 4 x 114.3, 5 x 114.3 (CR-V), or 5 x 114.3 (ITR) Hubs. These units are sold as a left and right pair of trailing arms built to your specifications. Please Note: Custom Axles are required for 4 x 100, 4 x 114.3, and 5 x 114.3 (ITR) Hub Patterns. 

Please note: Hub and bearings are included.

Additional information

Weight 20 lbs
Dimensions 12 × 12 × 6 in
Wheel Hubs

4×100, 4×114.3, 5×114.3

StopTech Steel Braided Brake Lines

BBL-Yes, BBL-No

Powder Coating

PC-Yes, PC-No

Chassis

1988-1991 Civic/ CRX/ 4DR, 1988-1993 Integra 3DR/ 4DR, 1992-1995 Civic 2DR/ 3DR/ 4DR, 1996-2001 Civic 2DR/ 3DR/ 4DR, 1994-2001 Integra 3DR/ 4DR